VIEW 01 · DEPLOYED
820 MM · DEPLOYED
540 MM
Deployed
Folded
In situ
Mount
Fold-out Convertible Office Desk — Wall Mount with Blackboard & Side Shelf, White
Three specific moments this desk solves in a 30–45 sqm floor plan.
Each bullet names a physical situation we've measured in a real apartment, not a feature on the spec sheet.
The desk-corner that ate the path from your front door to your bed.
A 60 cm-deep desk plus a chair claims roughly 1.4 sqm of floor — and in a 38 sqm apartment that's the path. Mount this on the wall, fold it when you're not using it, and the chair stows under. The corridor opens back up.
The "where do I work" decision you've been making at the kitchen table for six weeks.
Two laptops on a 70 cm dining table is a daily friction loop. The 820 mm worktop fits a 15" laptop, a notebook, and an external mouse. The blackboard back panel takes pinned notes; the side shelf holds a small monitor or a stack of A4.
The fear of drilling into a rental wall and losing the deposit.
Standard kit fixes into stud, brick or plasterboard; rental-safe kit uses adhesive plates rated to 20 kg with no anchor holes — tested on painted gypsum for 30 days at full load. Both options ship with template, level, and the right hardware.
Full specification
The Fold-out Convertible Office Desk mounts to a single load-bearing wall and folds flat against it when not in use. In its closed position the unit projects 54 mm from the wall — narrower than most picture frames — and presents a black-painted backplate that doubles as a usable chalkboard. Deployed, it gives 820 mm of worktop at standard desk height (740 mm), with a fixed side shelf for a monitor riser, a stack of paper, or a small printer.
Construction is 18 mm engineered board with matt powder-coated steel hinges. Rated for 20 kg uniformly distributed; we don't recommend mounting a second screen heavier than 6 kg on the worktop edge. Hardware ships in two configurations — standard wall fixings for stud, brick or plasterboard, or a rental-safe adhesive plate kit that requires no drilling and leaves no anchor holes.
Shipped flat in a single 820 × 540 × 90 mm carton, 16.4 kg gross. Assembly: 1 person, 22–30 minutes with a power driver, 40–55 minutes by hand.
Two real apartments. Same constraint. Before and after, measured.
Both units below were measured by the customer with a tape and submitted with a phone floor plan. Identifying details removed; dimensions verified.
"The corridor came back the morning I folded it."
Customer's previous setup — 60 × 100 cm freestanding desk against the door wall — was forcing a 56 cm gap between the chair and the bed. After install, the chair stows under the folded plate; the path from front door to bedroom corner is unobstructed.
"I got a reading chair in the corner the desk used to block."
The freestanding desk in the bedroom corner cut the room in two and made the radiator inaccessible. After install on the long window wall, the corner cleared 1.6 sqm — enough for the reading chair the customer had been storing at a friend's.